Radial BigShot i/o 乐器信号无损耗旁路脚踏开关切换选择器DI直插盒批发零售 隔离变压器 消除接地回路的噪声DI直插盒 吉他DI盒 Radial DI直插盒
这就是声海创新带给大家“Radial BigShot i/o Instrument Switcher”的介绍。如果想了解更多产品价格可以点击查看产品请点击全部商品分类. 承接多功能厅、会议室、报告厅、歌舞厅、体育场馆、剧场、礼堂、酒吧、酒店、公共广播、舞台、教室、多功能厅，以及KTV，家庭卡拉OK一切商业用途音视频灯光音响扩声系统工程。提供方案设计、安装、调试等服务。为客户量身定制具有较强现实适用性的系统解决方案，欢迎您来电咨询！了解更多品牌产品请，致电咨询我们客服更优惠，欢迎您来电咨询！
24小时服务热线：18618339665，13146744100 , 13141244200
QQ: 2899296168 , 2782522719 , 2734604569 , 2752684760
声海创新--经销-正品保证! www.yphbuy.com
HotShot I/O 乐器信号无损耗旁路脚踏开关切换选择器DI直插盒
应用特点
u 采用脚踏开关在两个乐器之间开关切换
u 可控制音量电平，以适应乐器电平匹配
u 独立的调谐器旋钮，可控制辒出电平
u 带哑音指示灯
u 长电缆负载补偿电路
u 100%无源脚踏机械切换，无任何杂音和信号失真
u 军用级 14 规格钢材焊接制，使电路板丌会収生扭转
u 底部防滑垫处理，提供物理机械隔离和电气绝缘
技术指标
u 设备类型：无源脚踏切换
u 开关触点：军用级黄金触点
u 切换开关：A 和 B 切换
u 电源供电：9V 直流
u 设备尺寸：92 x 99 x 51mm
u 设备重量：560 克
BigShot i/o Instrument Switcher
True-bypass Instrument Selector
The BigShot i/o is an easy-to-use instrument selector that lets you quickly transition between any two instruments, while balancing the levels between them and feeding the output to your amplifier.
Toggle between two instruments with a single foot stomp
Adjustable volume control to match instrument levels
True-bypass operation retains the tone of the instruments
Separate tuner output and mute footswitch for silent tuning
Easy instrument changeovers on stage
The BigShot i/o allows you to switch between instruments on stage without pops through your amp or the need to adjust levels, while featuring 100% true-bypass for the most demanding purist. Input-2 is equipped with a volume control that lets you reduce the input sensitivity of the louder instrument so that the levels are matched when played through your amplifier. When passive instruments are used, a unique three-position Bright switch lets you compensate for instruments that lack shine in the high frequencies. The BigShot i/o is also equipped with a separate tuner output; with a simple foot stomp, the sound going to the amp is muted and diverted to the tuner for quiet on-stage adjustments.
BigShot i/o Specifications
The BigShot i/o is a passive instrument selector that enables the artist to select between two instruments using a simple mechanical switch. This true-bypass design delivers straight wire performance between the input and the output thus resulting in near perfect signal transfer. A variable level control can be used to reduce the input sensitivity on input-2 to compensate for overly loud instruments while a bright switch can also be inserted to compensate for the cable length and capacitive effect.
Specifications
Block Diagram
Graphs
Specifications
Audio circuit type: Passive, true bypass
Frequency response: 20Hz – 20kHz
Gain: -0.3dB
Features
Dim Switch, Bright Switch
Input Connectors: ?" jack for first instrument connection Input-2, ?" jack with dim and bright controls
Output Connectors: ?" jack is switchable between always-on, or engaged by Mute switch
Extras: Tuner/toggle switch
General
Construction: 14-gauge steel
Finish: Durable powder coat
Size (L x W x D): 3.9" x 3.6" x 2" (99 x 91.4 x 50.8mm)
Weight: 1.25 lb (0.56 kg)
Shipping size (L x W x D): 6.25" x 4.25" x 3" (158.7 x 108 x 76.2mm)
Shipping weight: 1.55 lb (0.70 kg)
Power: 9VDC, center pole negative
Conditions: For use in dry locations only between 5°C and 40°C
Warranty: Radial 3-year, transferable
