Radial Decoder 3通道输入带混音DI直插盒批发零售 隔离变压器 消除接地回路的噪声DI直插盒 吉他DI盒 Radial DI直插盒
这就是声海创新带给大家“Radial Decoder Mid/Side Matrix and Mic Preamp”的介绍。如果想了解更多产品价格可以点击查看产品请点击全部商品分类. 承接多功能厅、会议室、报告厅、歌舞厅、体育场馆、剧场、礼堂、酒吧、酒店、公共广播、舞台、教室、多功能厅,以及KTV,家庭卡拉OK一切商业用途音视频灯光音响扩声系统工程。提供方案设计、安装、调试等服务。为客户量身定制具有较强现实适用性的系统解决方案,欢迎您来电咨询!了解更多品牌产品请,致电咨询我们客服更优惠,欢迎您来电咨询!
24小时服务热线:18618339665,13146744100 , 13141244200
QQ: 2899296168 , 2782522719 , 2734604569 , 2752684760
声海创新--经销-正品保证! www.yphbuy.com
Decoder 3通道输入带混音DI直插盒
应用特点
u 用于前期-后期快速混合调整话筒比例增益
u 3 通道超静音的话筒前置放大器
u 可调整的预混音 M/S 立体声信号输出
u 内置 48V 幻象供电和独立的电平调整
u 内置立体声到单声道输出的差分计算
u 也可以使用预先录制的线路电平信号调整
u 独特书本式设计,保护控制旋钮不受外界撞击的伤害
u 军用级 14 规格钢材焊接制,使电路板不会发生扭转
u 底部防滑垫处理,提供物理机械隔离和电气绝缘
技术参数
u 电路类型:高质量前置话筒放大器和基于 M/S 立体声制式运算
u 通道数量:3 通道
u 频率响应:20Hz-20KHz
u 总谐波失真:0.005%
u 动态范围:96dB
u 输入阻抗:10KΩ
u 话筒输入增益:+65dB
u 线路输入增益:+25dB
u 最大输出:+17dBu
u 输出阻抗:300Ω
u 等效输入的噪声 (EIN):<-115dBu
u 本地噪声:-80dBu@40dBofgain
u 互调失真:<0.01%
u 高通滤波器:100Hz,-12dB/octave
u 尺寸: 114x57x147mm
u 重量:1.3Kg
Decoder Mid/Side Matrix and Mic Preamp
About the Decoder
Quick and easy mid/side recording without a mixer
Three ultra-quiet built-in mic preamps
Pre-mixed stereo outputs
Line level operation for use with pre-recorded tracks
The Radial Decoder is a microphone preamp and mid/side stereo matrix that allows the user to easily create M/S recordings without having to re-configure a recording console. Featuring built-in mic pre’s with phantom power and independent level control, the Decoder automatically combines the signals to a stereo output using the sum-difference method for spectacular stereo imaging that translates well to mono for broadcast.
The Decoder begins with three ultra-quiet microphone preamps. The mic/line input-1 is assigned to the MID or direct microphone, while mic/line input-2a is assigned to the SIDE microphone. A link button automatically duplicates and pans the signal and flips the phase for a traditional M/S stereo image when used with figure-8 microphones. Mic/line input-2b allows the Decoder to be used with a pair of cardioid microphones rather than a figure-8. This opens up the door for a variety of microphones and different spacing techniques to be employed for ultimate convenience and creativity. The Decoder can also be switched to +4dBu line level for Reamping? pre-recorded material during mix-down. Simply record a SIDE microphone while tracking and bounce to a stereo M/S image later.
As the Decoder is intended for use in the studio or in the field, the chassis is built out of heavy duty 14-gauge steel. The internal I-beam frame and book-end construction prevents premature damage to internal circuitry and protects knobs and switches from impact. A full bottom no-slip pad provides electrical insulation and mechanical isolation to reduce mishap. The chassis can also be rack- mounted on its own or with other Radial products using an optional rack kit.