Radial X-Amp 音箱有源再放大DI直插盒批发零售 隔离变压器 消除接地回路的噪声DI直插盒 吉他DI盒 Radial DI直插盒
这就是声海创新带给大家“Radial X-Amp Active Reamp”的介绍。如果想了解更多产品价格可以点击查看产品请点击全部商品分类. 承接多功能厅、会议室、报告厅、歌舞厅、体育场馆、剧场、礼堂、酒吧、酒店、公共广播、舞台、教室、多功能厅,以及KTV,家庭卡拉OK一切商业用途音视频灯光音响扩声系统工程。提供方案设计、安装、调试等服务。为客户量身定制具有较强现实适用性的系统解决方案,欢迎您来电咨询!了解更多品牌产品请,致电咨询我们客服更优惠,欢迎您来电咨询!
24小时服务热线:18618339665,13146744100 , 13141244200
QQ: 2899296168 , 2782522719 , 2734604569 , 2752684760
声海创新--经销-正品保证! www.yphbuy.com
X-Amp 音箱有源再放大DI直插盒
应用特点
u 有源二次放大器,100% A 类放大电路
u 过载 LED 指示灯有劣于监视辒入电平
u 双辒出,驱劢两台放大器或踏板链
u 支持同时使用两台放大器
u 第二个放大器辒出提供了缓冲,可防止信号损失
u +4dB 线路电平辒入信号
u 枀性反转,修正放大器之间的相位
u Out-2 隔离发压器,以消除接地回路
u 线路电平转换成乐器电平
u 配有录音设备的放大器 & 踏板接口
u 重新放大,让音轨声音发得厚实
u 在基本音轨、叠录音轨和混音上使用
u 独特书本式设计,保护控制旋钮丌叐外界撞击的伤害
u 军用级 14 规格钢材焊接制,使电路板丌会収生扭转
u 底部防滑垫处理,提供物理机械隔离和电气绝缘
技术参数
u 设备类型:无源、带隔离发压器
u 设备类型:100% A 类甲级放大电路驱劢
u 频率响应:20Hz ~ 15kHz (± 1.0dB)
u 信噪比:88dB below instrument level (-20dB
u 劢态范围:119dB
u 本底噪声:OUT-1 -110dB; OUT-2 -108dBu
u 最大辒入:+22dBu
u 总谐波失真:0.02% @ -15dBu
u 调制失真:0.02% @ -20dBu
u 辒入阻抗:600Ω
u 尺寸:84 x 127 x 48mm
u 重量:720 克
X-Amp Active Reamp
Active Reamp
The Radial X-Amp? is an active Reamper? that allows the engineer to play a pre-recorded track back through guitar amplifiers and pedals. This opens the door to explore new musical sounds and spur on the creative process so that your recording stands out.
Active Reamp? with two outputs
100% discrete class-A signal path
Transformer isolated to eliminate noise
LED peak indicator and level control
Reamp for professionals
Following the critically acclaimed Radial JD7? Injector, the X-Amp employs a unique class-A circuit design that has been optimized for use with guitars. Features include balanced line level input with LED peak indicator and level control, class-A circuit topology for optimal reach and frequency response, a transformer isolated output to eliminate hum and buzz caused by ground loops, a 180° polarity reverse switch to bring both amps into phase, and a dual ground lift switch for noise-free operation.
X-Amp Specifications
The Radial X-Amp is a high performance active Reamp designed to smoothly interface a pre-recorded guitar signal to a guitar amplifier. Careful attention has been applied to gently roll off the high end so that the brightness of the recorder is softened for a more natural rendering. Designed to reproduce typical guitar levels below -10dBu, the X-Amp delivers remarkable performance with very little distortion or self noise.
Specifications
Block Diagram
Graphs
Specifications
Audio circuit type: 100% discrete class-A
Frequency response: 20Hz ~ 15kHz (± 1.0dB)
Dynamic range: 119dB
Total harmonic distortion: 0.02% @ -15dBu
Intermodulation Distortion: 0.02% @ -20dBu
Input Impedance: 600?
Noise: OUT-1 -110dB; OUT-2 -108dBu
Maximum Input: +22dBu
Features
180° polarity reverse, Ground lift, Level Control
Input Connectors: XLR
Output Connectors: 1/4" Isolated and Direct
General
Construction: 14 gauge steel chassis & outer shell
Size (L x W x D): 3.3" x 5.0" x 2" (84 x 127 x 48mm)
Weight: 1.55lb (720g)
Shipping size (L x W x D): 5" x 2.75" x 10.75" (127 x 70 x 273mm)
Shipping weight: 2.6lb (1.18kg)
Power: +15VDC/400mA adapter included
Conditions: For use in dry locations only between 5°C and 40°C
Warranty: Radial 3-year, transferable