Radial JX62 吉他信号放大切换器DI直插盒批发零售 隔离变压器 消除接地回路的噪声DI直插盒 吉他DI盒 Radial DI直插盒
这就是声海创新带给大家“Radial JX62 Guitar and Amp Switcher”的介绍。如果想了解更多产品价格可以点击查看产品请点击全部商品分类. 承接多功能厅、会议室、报告厅、歌舞厅、体育场馆、剧场、礼堂、酒吧、酒店、公共广播、舞台、教室、多功能厅,以及KTV,家庭卡拉OK一切商业用途音视频灯光音响扩声系统工程。提供方案设计、安装、调试等服务。为客户量身定制具有较强现实适用性的系统解决方案,欢迎您来电咨询!了解更多品牌产品请,致电咨询我们客服更优惠,欢迎您来电咨询!
24小时服务热线:18618339665,13146744100 , 13141244200
QQ: 2899296168 , 2782522719 , 2734604569 , 2752684760
声海创新--经销-正品保证! www.yphbuy.com
JX-62 吉他信号放大切换器DI直插盒
应用特点
u 用于 6 个吉他和 2 个放大器之间的切换
u 100%精密的 A 类线路放大,以获得最佳声音质量
u 内置 Radial 声学吉他优化电路处理放大器
u 内置 PFL 和耳机放大器的系统检查
u 隔离输入/输出,能够有效消除噪音
u 100%精密的 A 类线路放大,以获得最佳声音质量
u 任何或全部通道可在同一时间被激活,并混合到主总线
u 提供 A/B2 个输出切换,并带有隔离输出
u 配有接地解除开关和极性反向转换开关
u PFL 和耳机放大器,用于检测、监听通道工作切换状态
u 独特书本式设计,保护控制旋钮不受外界撞击的伤害
u 军用级 14 规格钢材焊接制,使电路板不会发生扭转
u 底部防滑垫处理,提供物理机械隔离和电气绝缘
技术参数
u 设备类型:A 类缓冲器和光电开关
u 频率响应:20Hz~20KHz
u 动态范围:>120dB
u 输入阻抗:+18dBu
u 总谐波失真:0.007%
u 相位偏差:<10°@50Hz
u 互调失真:0.027%
u 等效输入噪声:-94.7dBu
u 本底噪声:-89.7dBu
u 输入阻抗:22KΩ
u 输出阻抗:680Ω平衡,35KΩ非平衡
u 输出电平:+22dBu
u 尺寸:445x153x17.5mm
u 重量:3.2Kg
JX62 Guitar and Amp Switcher
Concert Touring Guitar and Amplifier Switcher
The JX62? is a guitar and amp switcher designed for both wired and wireless guitars in a live concert touring environment, with the ability to switch between up to six instruments and two amplifiers with ease.
Select between 6 guitars and 2 amps
PFL switches and headphone output for system checks
Two Radial DI outputs for acoustic guitars
Transformer isolated to eliminate ground loops
A guitar technician's best friend
The JX62 can help tame even the most complex guitar rigs, routing multiple inputs and outputs while also providing a stage tech with a headphone output and PFL switches to silently tune instruments and monitor any input without disrupting the performance. All six instrument inputs have adjustable trim controls to balance their relative levels, while channels 5 and 6 also feature direct outputs to feed the PA system, eliminating the need for external direct boxes. Dual amplifier outputs can be selected locally or with a remote JR-2 footswitch, with transformer isolation and ground lift switches to ensure noise free operation.
JX62 Specifications
The Radial JX62 is an unbalanced guitar selector with a built in ABY amp switcher. Special attention on maintaining the signal integrity by way of class-A buffers and carefuly chosen transformers has been applied throughout the design. Minimizing noise, hum and buzz is also a top priority, as is presenting the user with a logical and straight forward user interface.
Specifications
Block Diagram
Graphs
Specifications
Audio circuit type: Class-A buffers with optical switching
Transformer: Eclipse ET-DB2 & Jensen JT-11-YMPC
Number of channels: 6 guitars 2 amps
Frequency response: 20Hz ~ 20kHz (± 1dB)
Dynamic range: 120dB
Clip Level: Channel Output :+22dBu Headphone: 5V RMS
Total harmonic distortion: 0.007%
Intermodulation Distortion: 0.027%
Phase Deviation: <10° @ 50Hz
Input Impedance: Variable from 22K Ohm to 1M Ohm
Output Impedance: XLR outputs - 680 Ohms
Equivalent Input Noise: -94.7dBu
Noise: -89.7dBu
Maximum Input: +18dBu
Features
180° polarity reverse, Ground lift, Drag Control, Level Control, Effects Loop, Remote Footswitch
Input Connectors: 6 x 1/4" inputs
Output Connectors: 6 x 1/4" thru, 4 x 1/4" amplifier outputs, 4 x XLR balanced
Extras: 2 x tuner outputs, Effects Loop, Optional JR-2 remote
General
Construction: 14 gauge steel chassis & outer shell
Size (L x W x D): 17.5" x 6" x 1.75" (1112.5px x 381.25px x 43.75px)
Weight: 6.95lb (3.2kg)
Shipping size (L x W x D): 22" x 10.375" x 4.5" (1397.5px x 660px x 285px)
Shipping weight: 9.2lb (4.2kg)
Power: External supply 500mA with XLR-4 connector
Conditions: For use in dry locations only between 5°C and 40°C
Warranty: Radial 3-year, transferable